# # PyKota : Print Quotas for CUPS # # (c) 2003-2013 Jerome Alet # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # # $Id$ # Sergio González González , 2005. # # # msgid "" msgstr "" "Project-Id-Version: pykota\n" "Report-Msgid-Bugs-To: alet@librelogiciel.com\n" "POT-Creation-Date: 2006-03-30 22:00+0200\n" "PO-Revision-Date: 2005-02-23 20:05+0100\n" "Last-Translator: Sergio González González \n" "Language-Team: Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.9.1\n" # # NB : THE FIVE ENTRIES BELOW WERE ADDED MANUALLY # msgid "ALLOW" msgstr "" msgid "DENY" msgstr "" msgid "CANCEL" msgstr "" msgid "PROBLEM" msgstr "" msgid "REFUND" msgstr "" #, python-format msgid "" "autopykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A tool to automate user account creation and initial balance setting.\n" "\n" "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n" "\n" "command line usage :\n" "\n" " THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n" " OF AN external policy IN pykota.conf\n" " \n" " autopykota { -i | --initbalance value } \n" "\n" "options :\n" "\n" " -v | --version Prints autopykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -i | --initbalance b Sets the user's account initial balance value to b.\n" " If the user already exists, actual balance is left\n" " unmodified. If unset, the default value is 0.\n" "\n" " -e | --email addr Sets the user's e-mail address.\n" " \n" msgstr "" #, python-format msgid "SIGTERM received, job %s cancelled." msgstr "Señal SIGTERM recibida, trabajo %s cancelado." #, python-format msgid "Network error while querying the CUPS server : %s" msgstr "" msgid "You are not allowed to print at this time." msgstr "" msgid "Print job cancelled." msgstr "" msgid "Unlimited" msgstr "" msgid "ON" msgstr "" msgid "OFF" msgstr "" #, python-format msgid "Banner generator %s exit code is %s" msgstr "El código de salida del generador de banners %s es %s" msgid "Banner won't be printed : maximum number of deny banners reached." msgstr "El banner no se imprimirá : se ha alcanzado el máximo número de banners rechazados." #, python-format msgid "Beware : computed job size (%s) != precomputed job size (%s)" msgstr "Cuidado : tamaño del trabajo calculado (%s) != tamaño del trabajo precalculado (%s)" msgid "The job size will be trusted anyway according to the 'trustjobsize' directive" msgstr "El tamaño del trabajo se validará de todas formas, de acuerdo con la directiva 'trustjobsize'" #, python-format msgid "The job size will be trusted because it is inferior to the 'trustjobsize' directive's limit %s" msgstr "El tamaño del trabajo se validará porque es inferior al límite de la directiva 'trustjobsize' %s" #, python-format msgid "The job size will be modified according to the 'trustjobsize' directive : %s" msgstr "El tamaño del trabajo se modificará de acuerdo con la directiva 'trustjobsize' : %s" #, python-format msgid "Printer %s not registered in the PyKota system, applying external policy (%s) for printer %s" msgstr "Impresora %s no registrada en el sistema PyKota, aplicando la política externa (%s) para la impresora %s" #, python-format msgid "User %s not registered in the PyKota system, applying external policy (%s) for printer %s" msgstr "Usuario %s no registrado en el sistema PyKota, aplicando la política externa (%s) para la impresora %s" #, python-format msgid "User %s doesn't have quota on printer %s in the PyKota system, applying external policy (%s) for printer %s" msgstr "El usuario %s no posee cuota en la impresora %s bajo el sistema PyKota, aplicando la política externa (%s) para la impresora %s" #, python-format msgid "External policy %s for printer %s produced an error. Job rejected. Please check PyKota's configuration files." msgstr "La política externa %s para la impresora %s ha producido un error. Trabajo rechazado. Por favor, revise los archivos de configuración de PyKota." #, python-format msgid "Printer %s not registered in the PyKota system, applying default policy (%s)" msgstr "Impresora %s no registrada en el sistema PyKota, aplicando la política por defecto (%s)" #, python-format msgid "User %s not registered in the PyKota system, applying default policy (%s) for printer %s" msgstr "Usuario %s no registrado en el sistema PyKota, aplicando la política por defecto (%s) para la impresora %s" #, python-format msgid "User %s doesn't have quota on printer %s in the PyKota system, applying default policy (%s)" msgstr "el usuario %s no posee cuota en la impresora %s bajo el sistema PyKota, aplicando la política por defecto (%s)" #, python-format msgid "Printer %s still not registered in the PyKota system, job will be rejected" msgstr "La impresora %s no se ha registrado todavía en el sistema PyKota, se va a rechazar el trabajo" #, python-format msgid "User %s still not registered in the PyKota system, job will be rejected on printer %s" msgstr "El usuario %s no se ha registrado todavía en el sistema PyKota, el trabajo se va a rechazar en la impresora %s" #, python-format msgid "User %s still doesn't have quota on printer %s in the PyKota system, job will be rejected" msgstr "El usuario %s no tiene todavía cuota en la impresora %s bajo el sistema PyKota, se va a rechazar el trabajo" msgid "Job is a dupe" msgstr "" msgid "Printing is denied by configuration" msgstr "" #, python-format msgid "Duplicate print jobs are not allowed on printer %s." msgstr "" msgid "Subprocess denied printing of a dupe" msgstr "" #, python-format msgid "Duplicate print jobs are not allowed on printer %s at this time." msgstr "" msgid "Subprocess allowed printing of a dupe" msgstr "" #, python-format msgid "" "\n" "\n" "Your system administrator :\n" "\n" "\t%s - <%s>\n" msgstr "" #, python-format msgid "Impossible to connect to SMTP server : %s" msgstr "Imposible conectar con el servidor SMTP: %s" msgid "Print Quota" msgstr "Cuota de impresión" #, python-format msgid "Impossible to send mail to %s, error %s : %s" msgstr "Imposible enviar un correo electrónico a %s, error %s : %s" #, python-format msgid "Problem when sending mail : %s" msgstr "" msgid "Job contains no data. Printing is denied." msgstr "El trabajo no contiene una fecha. Se deniega la impresión." msgid "Error in external policy script. Printing is denied." msgstr "" #, python-format msgid "Still no print quota entry for user %s on printer %s after external policy. Printing is denied." msgstr "" msgid "Printing is denied by printer policy." msgstr "" msgid "Job allowed by printer policy. No accounting will be done." msgstr "" #, python-format msgid "Invalid policy %s for printer %s" msgstr "Política %s inválida para la impresora %s" #, python-format msgid "Precomputed job size (%s pages) too large for printer %s." msgstr "" #, python-format msgid "You are not allowed to print so many pages on printer %s at this time." msgstr "" #, python-format msgid "User %s is not allowed to print at this time." msgstr "" msgid "Your account settings forbid you to print at this time." msgstr "" #, python-format msgid "Print Quota exceeded for user %s on printer %s" msgstr "Cuota de impresión excedida para el usuario %s en la impresora %s" #, python-format msgid "Print Quota low for user %s on printer %s" msgstr "Cuota de impresión baja para el usuario %s en la impresora %s" msgid "Job denied, no accounting will be done." msgstr "" msgid "Job cancelled, no accounting will be done." msgstr "" msgid "Job accounting begins." msgstr "Ha comenzado la contabilización para el trabajo." msgid "Job denied, no accounting has been done." msgstr "" msgid "Job cancelled, no accounting has been done." msgstr "" msgid "Job accounting ends." msgstr "Ha terminado la contabilización para el trabajo." msgid "Job size forced to 0 because the real CUPS backend failed. No accounting will be done." msgstr "" msgid "The real CUPS backend failed, but the job will be accounted for anyway." msgstr "" msgid "Job size forced to 0 because printing is denied." msgstr "Se ha forzado el tamaño del trabajo a 0 debido a que la impresión está denegada." msgid "Job size forced to 0 because printing was cancelled." msgstr "" #, python-format msgid "Job size : %i" msgstr "Tamaño del trabajo : %i" #, python-format msgid "User %s's quota on printer %s won't be modified" msgstr "" #, python-format msgid "Updating user %s's quota on printer %s" msgstr "Actualizada la cuota del usuario %s en la impresora %s" msgid "Job added to history." msgstr "Se ha añadido el trabajo al historial." #, python-format msgid "Billing code %s was updated." msgstr "" #, python-format msgid "Incorrect value for the 'onbackenderror' directive in section [%s]" msgstr "" #, python-format msgid "The real backend produced an error, we will try again in %s seconds." msgstr "" #, python-format msgid "Job %s interrupted by the administrator !" msgstr "" #, python-format msgid "" "dumpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Dumps PyKota database's content.\n" "\n" "command line usage :\n" "\n" " dumpykota [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints dumpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -d | --data type Dumps 'type' datas. Allowed types are :\n" " \n" " - history : dumps the jobs history.\n" " - users : dumps users.\n" " - groups : dumps user groups.\n" " - printers : dump printers.\n" " - upquotas : dump user quotas.\n" " - gpquotas : dump user groups quotas.\n" " - payments : dumps user payments.\n" " - pmembers : dumps printer groups members.\n" " - umembers : dumps user groups members.\n" " - billingcodes : dumps billing codes.\n" " - all : dumps all PyKota datas. The output format\n" " is always XML in this case.\n" " \n" " NB : the -d | --data command line option \n" " is MANDATORY.\n" " \n" " -f | --format fmt Dumps datas in the 'fmt' format. When not specified,\n" " the format is to dump datas in the csv format (comma\n" " separated values). All data dumped is between double\n" " quotes. Allowed formats are :\n" " \n" " - csv : separate datas with commas\n" " - ssv : separate datas with semicolons\n" " - tsv : separate datas with tabs\n" " - xml : dump data as XML \n" " - cups : dump datas in CUPS' page_log format :\n" " ONLY AVAILABLE WITH --data history\n" " \n" " -o | --output fname All datas will be dumped to the file instead of\n" " to the standard output. The special '-' filename\n" " is the default value and means stdout.\n" " WARNING : existing files are truncated !\n" "\n" " -O | --orderby exp Change the ordering or result. 'exp' is a comma\n" " separated list of ordering statements, for example\n" " '--orderby +username,-printername'. Not all expression\n" " values are meaningful, so using this command line \n" " switch is not recommanded if you don't know the \n" " exact layout of PyKota's database schema.\n" " \n" " -s | --sum Summarize the selected datas.\n" " ONLY AVAILABLE WITH --data history or payments\n" "\n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " groupname Users group's name\n" " printername Printer's name\n" " pgroupname Printers group's name\n" " hostname Client's hostname\n" " jobid Job's Id\n" " billingcode Job's billing code\n" " start Job's date of printing\n" " end Job's date of printing\n" " \n" " Dates formatting with 'start' and 'end' filter keys :\n" " \n" " YYYY : year boundaries\n" " YYYYMM : month boundaries\n" " YYYYMMDD : day boundaries\n" " YYYYMMDDhh : hour boundaries\n" " YYYYMMDDhhmm : minute boundaries\n" " YYYYMMDDhhmmss : second boundaries\n" " yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n" " today[+-NbDays] : today more or less N days (e.g. : today-15)\n" " tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n" " now[+-NbDays] : now more or less N days (e.g. now-15)\n" "\n" " 'now' and 'today' are not exactly the same since today represents the first\n" " or last second of the day depending on if it's used in a start= or end=\n" " date expression. The utility to be able to specify dates in the future is\n" " a question which remains to be answered :-)\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" " NB : not all keys are allowed for each data type, so the result may be \n" " empty if you use a key not available for a particular data type.\n" " \n" "Examples :\n" "\n" " $ dumpykota --data history --format csv >myfile.csv\n" " \n" " This dumps the history in a comma separated values file, for possible\n" " use in a spreadsheet.\n" " \n" " $ dumpykota --data users --format xml -o users.xml\n" " \n" " Dumps all users datas to the users.xml file.\n" " \n" " $ dumpykota --data history printername=HP2100 username=jerome\n" " \n" " Dumps the job history for user jerome on printer HP2100 only.\n" " \n" " $ dumpykota --data history start=200503 end=20050730234615\n" " \n" " Dumps all jobs printed between March 1st 2005 at midnight and\n" " July 30th 2005 at 23 hours 46 minutes and 15 secondes included.\n" msgstr "" msgid "The -d | --data command line option is mandatory, see help." msgstr "La opción -d | --data es obligatoria, vea la ayuda." #, python-format msgid "" "edpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A Print Quota editor for PyKota.\n" "\n" "command line usage :\n" "\n" " edpykota [options] user1 user2 ... userN\n" " \n" " edpykota [options] group1 group2 ... groupN\n" "\n" "options :\n" "\n" " -v | --version Prints edpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds users or groups print quota entries if\n" " they don't exist in database.\n" " \n" " -d | --delete Deletes users or groups print quota entries.\n" " Users or groups are never deleted, you have\n" " to use the pkusers command to delete them.\n" " The history will be purge from all matching\n" " jobs, unless -g | --groups is used.\n" " \n" " -P | --printer p Edit quotas on printer p only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers. \n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" " -g | --groups Edit groups print quota entries instead of \n" " users print quota entries.\n" " \n" " -L | --list Lists users or groups print quota entries.\n" " \n" " -n | --noquota Sets both soft and hard limits to None for users\n" " or groups print quota entries.\n" " \n" " -r | --reset Resets the actual page counter for the user\n" " or group to zero on the specified printers. \n" " The life time page counter is kept unchanged.\n" " \n" " -R | --hardreset Resets the actual and life time page counters\n" " for the user or group to zero on the specified \n" " printers. This is a shortcut for '--used 0'.\n" " \n" " -s | --skipexisting In combination with the --add option above, tells\n" " edpykota to not modify existing print quota entries.\n" " \n" " -S | --softlimit sl Sets the quota soft limit to sl pages. \n" " \n" " -H | --hardlimit hl Sets the quota hard limit to hl pages.\n" " \n" " -I | --increase v Increase existing Soft and Hard limits by the value\n" " of v. You can prefix v with + or -, if no sign is\n" " used, + is assumed.\n" "\n" " -U | --used u Sets the page counters for the user u pages on\n" " the selected printers. Doesn't work for groups, since\n" " their page counters are the sum of all their members'\n" " page counters.\n" " Useful for migrating users from a different system\n" " where they have already used some pages. Actual\n" " and Life Time page counters may be increased or decreased\n" " if u is prefixed with + or -.\n" " WARNING : BOTH page counters are modified in all cases,\n" " so be careful.\n" " NB : if u equals '0', then the action taken is\n" " the same as if --hardreset was used.\n" "\n" " user1 through userN and group1 through groupN can use wildcards\n" " if the --add option is not set.\n" " \n" "examples : \n" "\n" " $ edpykota --add john paul george ringo\n" " \n" " This will create print quota entries for users john, paul, george\n" " and ringo on all printers. These print quota entries will have no\n" " limit set.\n" " \n" " $ edpykota --printer lp -S 50 -H 60 jerome\n" " \n" " This will set jerome's print quota on the lp printer to a soft limit\n" " of 50 pages, and a hard limit of 60 pages. Both user jerome and\n" " printer lp have been previously created with the pkusers and pkprinters\n" " commands, respectively.\n" "\n" " $ edpykota -g -S 500 -H 550 financial support \n" " \n" " This will set print quota soft limit to 500 pages and hard limit\n" " to 550 pages for groups financial and support on all printers.\n" " \n" " $ edpykota --reset jerome \"jo*\"\n" " \n" " This will reset jerome's page counter to zero on all printers, as\n" " well as every user whose name begins with 'jo'.\n" " Their life time page counter on each printer will be kept unchanged.\n" " You can also reset the life time page counters by using the\n" " --hardreset | -R command line option.\n" " \n" " $ edpykota --printer hpcolor --noquota jerome\n" " \n" " This will tell PyKota to not limit jerome when printing on the \n" " hpcolor printer. All his jobs will be allowed on this printer, but \n" " accounting of the pages he prints will still be kept.\n" " Print Quotas for jerome on other printers are unchanged.\n" " \n" " $ edpykota --delete --printer \"HP*,XER*\" jerome rachel\n" " \n" " This will delete users jerome and rachel's print quota\n" " entries on all printers which name begin with 'HP' or\n" " 'XER'. The jobs printed by these users on these printers\n" " will be deleted from the history.\n" msgstr "" #, python-format msgid "You can't set negative limits for %s" msgstr "" msgid "Extracting datas" msgstr "" #, python-format msgid "Page counter : %s" msgstr "" #, python-format msgid "Lifetime page counter : %s" msgstr "" #, python-format msgid "Soft limit : %s" msgstr "" #, python-format msgid "Hard limit : %s" msgstr "" #, python-format msgid "Date limit : %s" msgstr "" #, python-format msgid "Maximum job size : %s" msgstr "" #, python-format msgid "%s pages" msgstr "" #, python-format msgid "Warning banners printed : %s" msgstr "" msgid "Deletion" msgstr "" #, python-format msgid "Invalid used value %s." msgstr "Valor utilizado, %s, inválido." #, python-format msgid "Invalid increase value %s." msgstr "" #, python-format msgid "Invalid softlimit value %s." msgstr "Valor %s incorrecto para el límite blando." #, python-format msgid "Invalid hardlimit value %s." msgstr "Valor %s incorrecto para el límite duro." #, python-format msgid "Hard limit %i is less than soft limit %i, values will be exchanged." msgstr "El límite duro %i es menor que el límite blando %i, los valores serán intercambiados." #, python-format msgid "Undefined hard limit set to soft limit (%s)." msgstr "" #, python-format msgid "Undefined soft limit set to hard limit (%s)." msgstr "" msgid "Creation" msgstr "" #, python-format msgid "No entry matches %s. Please use pkusers to create them first." msgstr "" msgid "Modification" msgstr "" msgid "incompatible options, see help." msgstr "opciones incompatibles, vea la ayuda." msgid "You have to pass user or group names on the command line" msgstr "Ha de proporcionar nombres de usuarios o grupos en la línea de comandos" #, python-format msgid "" "repykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Generates print quota reports.\n" "\n" "command line usage :\n" "\n" " repykota [options] \n" "\n" "options :\n" "\n" " -v | --version Prints repykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -u | --users Generates a report on users quota, this is \n" " the default.\n" " \n" " -g | --groups Generates a report on group quota instead of users.\n" " \n" " -i | --ingroups g1[,g2...] Only lists users who are members of these\n" " groups. Reserved to PyKota Administrators.\n" " \n" " -P | --printer p Report quotas on this printer only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers.\n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" "examples : \n" "\n" " $ repykota --printer lp\n" " \n" " This will print the quota status for all users who use the lp printer.\n" "\n" " $ repykota \n" " \n" " This will print the quota status for all users on all printers.\n" " \n" " $ repykota --printer \"laser*,*pson\" jerome \"jo*\"\n" " \n" " This will print the quota status for user jerome and all users\n" " whose name begins with \"jo\" on all printers which name begins\n" " with \"laser\" or ends with \"pson\".\n" " \n" " If launched by an user who is not a PyKota administrator, additionnal\n" " arguments representing users or groups names are ignored, and only the\n" " current user/group is reported.\n" msgstr "" msgid "Option --ingroups is reserved to PyKota Administrators." msgstr "" #, python-format msgid "There's no printer matching %s" msgstr "Impresora %s no encontrada" #, python-format msgid "" "warnpykota v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Sends mail to users over print quota.\n" "\n" "command line usage :\n" "\n" " warnpykota [options] [names]\n" "\n" "options :\n" "\n" " -v | --version Prints warnpykota's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -u | --users Warns users over their print quota, this is the \n" " default.\n" " \n" " -g | --groups Warns users whose groups quota are over limit.\n" " \n" " -P | --printer p Verify quotas on this printer only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers.\n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" "examples : \n" "\n" " $ warnpykota --printer lp\n" " \n" " This will warn all users of the lp printer who have exceeded their\n" " print quota.\n" "\n" " $ warnpykota \n" " \n" " This will warn all users who have exceeded their print quota on\n" " any printer.\n" "\n" " $ warnpykota --groups --printer \"laserjet*\" \"dev*\"\n" " \n" " This will warn all users of groups which names begins with \"dev\" and\n" " who have exceeded their print quota on any printer which name begins \n" " with \"laserjet\"\n" " \n" " If launched by an user who is not a PyKota administrator, additionnal\n" " arguments representing users or groups names are ignored, and only the\n" " current user/group is reported.\n" msgstr "" #, python-format msgid "" "pkbanner v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Generates banners.\n" "\n" "command line usage :\n" "\n" " pkbanner [options] [more info]\n" "\n" "options :\n" "\n" " -v | --version Prints pkbanner's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -l | --logo img Use the image as the banner's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" " \n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" " \n" " -s | --savetoner s Sets the text luminosity factor to s%%. This can be \n" " used to save toner. The default value is 0, which\n" " means that no toner saving will be done.\n" " \n" " -u | --url u Uses u as an url to be written at the bottom of \n" " the banner page. The default url is :\n" " http://www.pykota.com/\n" " \n" "examples : \n" "\n" " Using pkbanner directly from the command line is not recommended,\n" " excepted for testing purposes. You should use pkbanner in the\n" " 'startingbanner' or 'endingbanner' directives in pykota.conf\n" " \n" " startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n" " \n" " With such a setting in pykota.conf, all print jobs will be \n" " prefixed with an A4 banner with no logo, and text luminosity will\n" " be increased by 75%%. The PostScript output will be directly sent\n" " to your printer.\n" " \n" " You'll find more examples in the sample configuration file included \n" " in PyKota.\n" msgstr "" msgid "Unknown" msgstr "Desconocido" msgid "Username" msgstr "Nombre de usuario" msgid "More Info" msgstr "" msgid "Job" msgstr "Trabajo" msgid "Date" msgstr "Fecha" msgid "Allowed" msgstr "Permitido" msgid "Denied" msgstr "Denegado" msgid "Allowed with Warning" msgstr "Permitido con aviso" msgid "Problem" msgstr "" msgid "Cancelled" msgstr "" msgid "Result" msgstr "Resultado" msgid "Title" msgstr "Título" msgid "Filename" msgstr "Nombre del archivo" #, python-format msgid "Pages printed so far on %s" msgstr "Las páginas impresas a partir de ahora en %s" msgid "Account balance" msgstr "Balance de la cuenta" msgid "Soft Limit" msgstr "Límite blando" msgid "Hard Limit" msgstr "Límite duro" msgid "Date Limit" msgstr "Fecha límite" msgid "No Limit" msgstr "" msgid "No Accounting" msgstr "" msgid "Forbidden" msgstr "" msgid "Printing Mode" msgstr "" msgid "Allowed range is (0..99)" msgstr "El rango permitido es (0..99)" #, python-format msgid "Invalid 'savetoner' option %s : %s" msgstr "Opción 'savetoner' %s inválida : %s" #, python-format msgid "Invalid 'pagesize' option %s, defaulting to A4." msgstr "Opción 'pagesize' %s inválida, empleando el valor por defecto A4." #, python-format msgid "" "pkbcodes v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A billing codes Manager for PyKota.\n" "\n" "command line usage :\n" "\n" " pkbcodes [options] code1 code2 code3 ... codeN\n" "\n" "options :\n" "\n" " -v | --version Prints pkbcodes version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds billing codes if they don't exist in PyKota's\n" " database. If they exist, they are modified\n" " unless -s|--skipexisting is also used.\n" "\n" " -d | --delete Deletes billing codes from PyKota's database.\n" " NB : the history entries with this billing code\n" " are not deleted, voluntarily.\n" "\n" " -D | --description d Adds a textual description to billing codes.\n" "\n" " -l | --list List informations about the billing codes.\n" "\n" " -r | --reset Resets the billing codes' balance and page counters\n" " to 0.\n" "\n" " -s | --skipexisting In combination with the --add option above, tells\n" " pkbcodes to not modify existing billing codes.\n" "\n" " code1 through codeN can contain wildcards if the --add option\n" " is not set.\n" "\n" "examples : \n" "\n" " $ pkbcodes --add -D \"My project\" myproj\n" "\n" " Will create the myproj billing code with \"My project\"\n" " as the description.\n" "\n" " $ pkbcodes --delete \"*\"\n" "\n" " This will completely delete all the billing codes, but without\n" " removing any matching job from the history. USE WITH CARE ANYWAY !\n" " \n" " $ pkbcodes --list \"my*\"\n" " \n" " This will list all billing codes which name begins with 'my'.\n" msgstr "" msgid "You're not allowed to use this command." msgstr "No tiene permiso para utilizar esta orden." #, python-format msgid "There's no billingcode matching %s" msgstr "" msgid "pages" msgstr "" msgid "and" msgstr "" msgid "credits" msgstr "" #, python-format msgid "Billing code [%s] already exists, skipping." msgstr "" #, python-format msgid "Billing code [%s] already exists, will be modified." msgstr "" msgid "You have to pass billing codes on the command line" msgstr "" #, python-format msgid "" "pkinvoice v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "An invoice generator for PyKota.\n" "\n" "command line usage :\n" "\n" " pkinvoice [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints pkinvoice's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -l | --logo img Use the image as the invoice's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" " \n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" " \n" " -n | --number N Sets the number of the first invoice. This number\n" " will automatically be incremented for each invoice.\n" " \n" " -o | --output f.pdf Defines the name of the invoice file which will\n" " be generated as a PDF document. If not set or\n" " set to '-', the PDF document is sent to standard\n" " output. \n" " \n" " -u | --unit u Defines the name of the unit to use on the invoice. \n" " The default unit is 'Credits', optionally translated\n" " to your native language if it is supported by PyKota.\n" " \n" " -V | --vat p Sets the percent value of the applicable VAT to be\n" " exposed. The default is 0.0, meaning no VAT\n" " information will be included.\n" " \n" "\n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " printername Printer's name\n" " hostname Client's hostname\n" " jobid Job's Id\n" " billingcode Job's billing code\n" " start Job's date of printing\n" " end Job's date of printing\n" " \n" " Dates formatting with 'start' and 'end' filter keys :\n" " \n" " YYYY : year boundaries\n" " YYYYMM : month boundaries\n" " YYYYMMDD : day boundaries\n" " YYYYMMDDhh : hour boundaries\n" " YYYYMMDDhhmm : minute boundaries\n" " YYYYMMDDhhmmss : second boundaries\n" " yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n" " today[+-NbDays] : today more or less N days (e.g. : today-15)\n" " tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n" " now[+-NbDays] : now more or less N days (e.g. now-15)\n" "\n" " 'now' and 'today' are not exactly the same since today represents the first\n" " or last second of the day depending on if it's used in a start= or end=\n" " date expression. The utility to be able to specify dates in the future is\n" " a question which remains to be answered :-)\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" "examples :\n" "\n" " $ pkinvoice --unit EURO --output /tmp/invoices.pdf start=now-30\n" " \n" " Will generate a PDF document containing invoices for all users\n" " who have spent some credits last month. Invoices will be done in\n" " EURO. No VAT information will be included.\n" msgstr "" msgid "Invoice" msgstr "" msgid "Edited on" msgstr "" msgid "Number of jobs printed" msgstr "" msgid "Number of pages printed" msgstr "" msgid "Amount due" msgstr "" msgid "Included VAT" msgstr "" msgid "Here's the invoice for your printouts" msgstr "" msgid "Generating invoices" msgstr "" #, python-format msgid "Incorrect value '%s' for the --vat command line option" msgstr "" #, python-format msgid "Incorrect value '%s' for the --number command line option" msgstr "" #, python-format msgid "Invalid filter value [%s], see help." msgstr "" #, python-format msgid "Invoiced %i users for %i jobs, %i pages and %.3f credits" msgstr "" msgid "Credits" msgstr "" #, python-format msgid "" "pkmail v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Email gateway for PyKota.\n" "\n" "command line usage :\n" "\n" " pkmail [options]\n" "\n" "options :\n" "\n" " -v | --version Prints pkmail's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " \n" " This command is meant to be used from your mail server's aliases file,\n" " as a pipe. It will then accept commands send to it in email messages,\n" " and will send the answer to the command's originator.\n" " \n" " To use this command, create an email alias in /etc/aliases with\n" " the following format :\n" " \n" " pykotacmd: \"|/usr/bin/pkmail\"\n" " \n" " Then run the 'newaliases' command to regenerate the aliases database.\n" " \n" " You can now send commands by email to 'pykotacmd@yourdomain.com', with\n" " the command in the subject.\n" " \n" " List of supported commands :\n" " \n" " report [username]\n" " \n" " NB : For pkmail to work correctly, you may have to put the 'mail'\n" " system user in the 'pykota' system group to ensure this user can\n" " read the /etc/pykota/pykotadmin.conf file, and restart your\n" " mail server (e.g. /etc/init.d/exim restart). It is strongly advised\n" " that you think at least twice before doing this though.\n" " \n" " Use at your own risk !\n" msgstr "" msgid "Result of your commands" msgstr "" #, python-format msgid "" "pknotify v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Notifies or ask questions to end users who launched the PyKotIcon application.\n" "\n" "command line usage :\n" "\n" " pknotify [options] [arguments]\n" "\n" "options :\n" "\n" " -v | --version Prints pknotify's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -d | --destination h[:p] Sets the destination hostname and optional\n" " port onto which contact the remote PyKotIcon\n" " application. This option is mandatory.\n" " When not specified, the port defaults to 7654.\n" " \n" " -a | --ask Tells pknotify to ask something to the end\n" " user. Then pknotify will output the result.\n" " \n" " -C | --checkauth When --ask is used and both an 'username' and a\n" " 'password' are asked to the end user, then\n" " pknotify will try to authenticate the user\n" " through PAM. If authentified, this program\n" " will print \"AUTH=YES\", else \"AUTH=NO\".\n" " If a field is missing, \"AUTH=IMPOSSIBLE\" will\n" " be printed. If the user is authenticated, then\n" " \"USERNAME=xxxx\" will be printed as well.\n" " \n" " -c | --confirm Tells pknotify to ask for either a confirmation \n" " or abortion.\n" " \n" " -D | --denyafter N With --checkauth above, makes pknotify loop \n" " up to N times if the password is incorrect.\n" " After having reached the limit, \"DENY\" will\n" " be printed, which effectively rejects the job.\n" " The default value of N is 1, meaning the job\n" " is denied after the first unsuccessful try.\n" " \n" " -N | --noremote action If it's impossible to connect to the remote\n" " PyKotIcon machine, do this action instead.\n" " Allowed actions are 'CONTINUE' and 'CANCEL', \n" " which will respectively allow the processing\n" " of the print job to continue, or the job to\n" " be cancelled. The default value is CANCEL.\n" " \n" " -n | --notify Tells pknotify to send an informational message\n" " to the end user.\n" " \n" " -q | --quit Tells pknotify to send a message asking the\n" " PyKotIcon application to exit. This option can\n" " be combined with the other ones to make PyKotIcon\n" " exit after having sent the answer from the dialog.\n" " \n" " -t | --timeout T Tells pknotify to ignore the end user's answer if\n" " it comes past T seconds after the dialog box being\n" " opened. The default value is 0 seconds, which \n" " tells pknotify to wait indefinitely.\n" " Use this option to avoid having an user who\n" " leaved his computer stall a whole print queue.\n" " \n" " You MUST specify either --ask, --confirm, --notify or --quit.\n" "\n" " arguments : \n" " \n" " -a | --ask : Several arguments are accepted, of the form\n" " \"label:varname:defaultvalue\". The result will\n" " be printed to stdout in the following format :\n" " VAR1NAME=VAR1VALUE\n" " VAR2NAME=VAR2VALUE\n" " ...\n" " If the dialog was cancelled, nothing will be\n" " printed. If one of the varname is 'password'\n" " then this field is asked as a password (you won't\n" " see what you type in), and is NOT printed. Although\n" " it is not printed, it will be used to check if\n" " authentication is valid if you specify --checkauth.\n" " \n" " -c | --confirm : A single argument is expected, representing the\n" " message to display. If the dialog is confirmed\n" " then pknotify will print OK, else CANCEL.\n" " \n" " -n | --notify : A single argument is expected, representing the \n" " message to display. In this case pknotify will\n" " always print OK.\n" " \n" "examples : \n" "\n" " pknotify -d client:7654 --noremote CONTINUE --confirm \"This job costs 10 credits\"\n" " \n" " Would display the cost of the print job and asks for confirmation.\n" " If the end user doesn't have PyKotIcon running and accepting connections\n" " from the print server, PyKota will consider that the end user accepted\n" " to print this job.\n" " \n" " pknotify --destination $PYKOTAJOBORIGINATINGHOSTNAME:7654 \\\n" " --checkauth --ask \"Your name:username:\" \"Your password:password:\"\n" " \n" " Asks an username and password, and checks if they are valid. \n" " NB : The PYKOTAJOBORIGINATINGHOSTNAME environment variable is\n" " only set if you launch pknotify from cupspykota through a directive\n" " in ~pykota/pykota.conf\n" " \n" " The TCP port you'll use must be reachable on the client from the\n" " print server.\n" msgstr "" msgid "You MUST install PyPAM for this functionnality to work !" msgstr "" #, python-format msgid "Authentication error for user %s : %s" msgstr "" #, python-format msgid "Internal error : can't authenticate user %s" msgstr "" #, python-format msgid "Password correct for user %s" msgstr "" #, python-format msgid "The end user at %s:%i didn't answer within %i seconds. The print job will be cancelled." msgstr "" #, python-format msgid "Are you sure that PyKotIcon is running and accepting incoming connections on %s:%s ?" msgstr "" msgid "Connection error" msgstr "" msgid "some options are mandatory, see help." msgstr "" msgid "incorrect value for the --noremote command line switch, see help." msgstr "" msgid "some options require arguments, see help." msgstr "" #, python-format msgid "" "pkprinters v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A Printers Manager for PyKota.\n" "\n" "command line usage :\n" "\n" " pkprinters [options] printer1 printer2 printer3 ... printerN\n" "\n" "options :\n" "\n" " -v | --version Prints pkprinters's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds printers if they don't exist on the Quota \n" " Storage Server. If they exist, they are modified\n" " unless -s|--skipexisting is also used.\n" " \n" " -d | --delete Deletes printers from the quota storage.\n" " \n" " -D | --description d Adds a textual description to printers.\n" "\n" " -C | --cups Also modifies the DeviceURI in CUPS' printers.conf\n" "\n" " -c | --charge p[,j] Sets the price per page and per job to charge.\n" " Job price is optional.\n" " If both are to be set, separate them with a comma.\n" " Floating point and negative values are allowed.\n" " \n" " -g | --groups pg1[,pg2...] Adds or Remove the printer(s) to the printer \n" " groups pg1, pg2, etc... which must already exist.\n" " A printer group is just like a normal printer,\n" " only that it is usually unknown from the printing\n" " system. Create printer groups exactly the same\n" " way that you create printers, then add other \n" " printers to them with this option.\n" " Accounting is done on a printer and on all\n" " the printer groups it belongs to, quota checking\n" " is done on a printer and on all the printer groups\n" " it belongs to.\n" " If the --remove option below is not used, the \n" " default action is to add printers to the specified\n" " printer groups.\n" " \n" " -l | --list List informations about the printer(s) and the\n" " printers groups it is a member of.\n" " \n" " -r | --remove In combination with the --groups option above, \n" " remove printers from the specified printers groups.\n" " \n" " -s | --skipexisting In combination with the --add option above, tells\n" " pkprinters to not modify existing printers.\n" " \n" " -m | --maxjobsize s Sets the maximum job size allowed on the printer\n" " to s pages.\n" " \n" " -p | --passthrough Activate passthrough mode for the printer. In this\n" " mode, users are allowed to print without any impact\n" " on their quota or account balance.\n" " \n" " -n | --nopassthrough Deactivate passthrough mode for the printer.\n" " Without -p or -n, printers are created in \n" " normal mode, i.e. no passthrough.\n" " \n" " printer1 through printerN can contain wildcards if the --add option \n" " is not set.\n" " \n" "examples : \n" "\n" " $ pkprinters --add -D \"HP Printer\" --charge 0.05,0.1 hp2100 hp2200 hp8000\n" " \n" " Will create three printers named hp2100, hp2200 and hp8000.\n" " Their price per page will be set at 0.05 unit, and their price\n" " per job will be set at 0.1 unit. Units are in your own currency,\n" " or whatever you want them to mean.\n" " All of their descriptions will be set to the string \"HP Printer\".\n" " If any of these printers already exists, it will also be modified \n" " unless the -s|--skipexisting command line option is also used.\n" " \n" " $ pkprinters --delete \"*\"\n" " \n" " This will completely delete all printers and associated quota information,\n" " as well as their job history. USE WITH CARE !\n" " \n" " $ pkprinters --groups Laser,HP \"hp*\"\n" " \n" " This will put all printers which name matches \"hp*\" into printers groups \n" " Laser and HP, which MUST already exist.\n" " \n" " $ pkprinters --groups LexMark --remove hp2200\n" " \n" " This will remove the hp2200 printer from the LexMark printer group.\n" msgstr "" #, python-format msgid "Passthrough mode : %s" msgstr "" #, python-format msgid "Routed through PyKota : %s" msgstr "" msgid "YES" msgstr "" msgid "NO" msgstr "" msgid "in" msgstr "en" msgid "Rerouting printers to CUPS" msgstr "" #, python-format msgid "Invalid charge amount value %s" msgstr "Valor %s inválido para el importe de carga" #, python-format msgid "Invalid maximum job size value %s" msgstr "" #, python-format msgid "Printer %s already exists, skipping." msgstr "La impresora %s ya existe, se salta." #, python-format msgid "Printer %s already exists, will be modified." msgstr "La impresora %s ya existe, va a ser modificada." #, python-format msgid "Invalid printer name %s" msgstr "Nombre de impresora %s inválido" msgid "You have to pass printer groups names on the command line" msgstr "Ha de proporcionar nombres de grupos de impresoras en la línea de comandos" msgid "You have to pass printer names on the command line" msgstr "Ha de proporcionar nombres de impresoras en la línea de comandos" #, python-format msgid "" "pkrefund v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Refunds jobs.\n" "\n" "command line usage :\n" "\n" " pkrefund [options] [filterexpr]\n" "\n" "options :\n" "\n" " -v | --version Prints pkrefund's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -f | --force Doesn't ask for confirmation before refunding jobs.\n" " -r | --reason txt Sets textual information to explain the refunding.\n" "\n" " -l | --logo img Use the image as the receipt's logo. The logo will\n" " be drawn at the center top of the page. The default\n" " logo is /usr/share/pykota/logos/pykota.jpeg\n" "\n" " -p | --pagesize sz Sets sz as the page size. Most well known\n" " page sizes are recognized, like 'A4' or 'Letter'\n" " to name a few. The default size is A4.\n" "\n" " -n | --number N Sets the number of the first receipt. This number\n" " will automatically be incremented for each receipt.\n" "\n" " -o | --output f.pdf Defines the name of the PDF file which will contain\n" " the receipts. If not set, then no PDF file will\n" " be created. If set to '-', then --force is assumed,\n" " and the PDF document is sent to standard output.\n" "\n" " -u | --unit u Defines the name of the unit to use on the receipts.\n" " The default unit is 'Credits', optionally translated\n" " to your native language if it is supported by PyKota.\n" " \n" "\n" " Use the filter expressions to extract only parts of the \n" " datas. Allowed filters are of the form :\n" " \n" " key=value\n" " \n" " Allowed keys for now are : \n" " \n" " username User's name\n" " printername Printer's name\n" " hostname Client's hostname\n" " jobid Job's Id\n" " billingcode Job's billing code\n" " start Job's date of printing\n" " end Job's date of printing\n" " \n" " Dates formatting with 'start' and 'end' filter keys :\n" " \n" " YYYY : year boundaries\n" " YYYYMM : month boundaries\n" " YYYYMMDD : day boundaries\n" " YYYYMMDDhh : hour boundaries\n" " YYYYMMDDhhmm : minute boundaries\n" " YYYYMMDDhhmmss : second boundaries\n" " yesterday[+-NbDays] : yesterday more or less N days (e.g. : yesterday-15)\n" " today[+-NbDays] : today more or less N days (e.g. : today-15)\n" " tomorrow[+-NbDays] : tomorrow more or less N days (e.g. : tomorrow-15)\n" " now[+-NbDays] : now more or less N days (e.g. now-15)\n" "\n" " 'now' and 'today' are not exactly the same since today represents the first\n" " or last second of the day depending on if it's used in a start= or end=\n" " date expression. The utility to be able to specify dates in the future is\n" " a question which remains to be answered :-)\n" " \n" " Contrary to other PyKota management tools, wildcard characters are not \n" " expanded, so you can't use them.\n" " \n" "Examples :\n" "\n" " $ pkrefund --output /tmp/receipts.pdf jobid=503\n" " \n" " This will refund all jobs which Id is 503. BEWARE : installing CUPS\n" " afresh will reset the first job id at 1, so you probably want to use\n" " a more precise filter as explained below. A confirmation will\n" " be asked for each job to refund, and a PDF file named /tmp/receipts.pdf\n" " will be created which will contain printable receipts.\n" " \n" " $ pkrefund --reason \"Hardware problem\" jobid=503 start=today-7\n" " \n" " Refunds all jobs which id is 503 but which were printed during the\n" " past week. The reason will be marked as being an hardware problem.\n" " \n" " $ pkrefund --force username=jerome printername=HP2100\n" " \n" " Refunds all jobs printed by user jerome on printer HP2100. No\n" " confirmation will be asked.\n" " \n" " $ pkrefund --force printername=HP2100 start=200602 end=yesterday\n" " \n" " Refunds all jobs printed on printer HP2100 between February 1st 2006\n" " and yesterday. No confirmation will be asked.\n" msgstr "" msgid "Refunding receipt" msgstr "" msgid "Jobs refunded" msgstr "" msgid "Pages refunded" msgstr "" msgid "Amount refunded" msgstr "" msgid "Reason" msgstr "" msgid "Here's the receipt for the refunding of your print jobs" msgstr "" msgid "Generating receipts" msgstr "" msgid "Refunding for no reason is forbidden. Please use the --reason command line option." msgstr "" msgid "The PDF file containing the receipts will be sent to stdout. --force is assumed." msgstr "" #, python-format msgid "Date : %s" msgstr "" #, python-format msgid "JobId : %s" msgstr "" #, python-format msgid "User : %s" msgstr "" #, python-format msgid "Printer : %s" msgstr "" #, python-format msgid "Billing code : %s" msgstr "" #, python-format msgid "Pages : %i" msgstr "" #, python-format msgid "Credits : %.3f" msgstr "" #, python-format msgid "Title : %s" msgstr "" msgid "Refund (Y/N)" msgstr "" msgid "Y" msgstr "" msgid "N" msgstr "" #, python-format msgid "Refunded %i users for %i jobs, %i pages and %.3f credits" msgstr "" #, python-format msgid "" "pkturnkey v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "A turn key tool for PyKota. When launched, this command will initialize\n" "PyKota's database with all existing print queues and some or all users.\n" "For now, no prices or limits are set, so printing is fully accounted\n" "for, but not limited. That's why you'll probably want to also use\n" "edpykota once the database has been initialized.\n" "\n" "command line usage :\n" "\n" " pkturnkey [options] [printqueues names]\n" "\n" "options :\n" "\n" " -v | --version Prints pkturnkey version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -c | --doconf Give hints about what to put into pykota.conf\n" " \n" " -d | --dousers Manages users accounts as well.\n" " \n" " -D | --dogroups Manages users groups as well.\n" " Implies -d | --dousers.\n" " \n" " -e | --emptygroups Includes empty groups.\n" " \n" " -f | --force Modifies the database instead of printing what\n" " it would do.\n" " \n" " -u | --uidmin uid Only adds users whose uid is greater than or equal to\n" " uid. You can pass an username there as well, and its\n" " uid will be used automatically.\n" " If not set, 0 will be used automatically.\n" " Implies -d | --dousers.\n" " \n" " -U | --uidmax uid Only adds users whose uid is lesser than or equal to\n" " uid. You can pass an username there as well, and its\n" " uid will be used automatically.\n" " If not set, a large value will be used automatically.\n" " Implies -d | --dousers.\n" "\n" " -g | --gidmin gid Only adds groups whose gid is greater than or equal to\n" " gid. You can pass a groupname there as well, and its\n" " gid will be used automatically.\n" " If not set, 0 will be used automatically.\n" " Implies -D | --dogroups.\n" " \n" " -G | --gidmax gid Only adds groups whose gid is lesser than or equal to\n" " gid. You can pass a groupname there as well, and its\n" " gid will be used automatically.\n" " If not set, a large value will be used automatically.\n" " Implies -D | --dogroups.\n" "\n" "examples : \n" "\n" " $ pkturnkey --dousers --uidmin jerome\n" "\n" " Will simulate the initialization of PyKota's database will all existing\n" " printers and print accounts for all users whose uid is greater than\n" " or equal to jerome's one. Won't manage any users group.\n" " \n" " To REALLY initialize the database instead of simulating it, please\n" " use the -f | --force command line switch.\n" " \n" " You can limit the initialization to only a subset of the existing\n" " printers, by passing their names at the end of the command line.\n" msgstr "" #, python-format msgid "Printer %s is not managed by PyKota yet. Please modify printers.conf and restart CUPS." msgstr "" msgid "Please be patient..." msgstr "" msgid "Don't worry, the database WILL NOT BE MODIFIED." msgstr "" msgid "Please WORRY NOW, the database WILL BE MODIFIED." msgstr "" msgid "System users will have a print account as well !" msgstr "" #, python-format msgid "Unknown username %s : %s" msgstr "" msgid "System groups will have a print account as well !" msgstr "" #, python-format msgid "Unknown groupname %s : %s" msgstr "" msgid "Simulation terminated." msgstr "" msgid "Database initialized !" msgstr "" msgid "The --uidmin or --uidmax command line option implies --dousers as well." msgstr "" msgid "The --gidmin or --gidmax command line option implies --dogroups as well." msgstr "" msgid "The --dogroups command line option implies --dousers as well." msgstr "" #, python-format msgid "" "pkusers v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "An Users and Groups Manager for PyKota.\n" "\n" "command line usage :\n" "\n" " pkusers [options] user1 user2 user3 ... userN\n" " \n" "or : \n" "\n" " pkusers --groups [options] group1 group2 group3 ... groupN\n" "\n" "options :\n" "\n" " -v | --version Prints pkusers's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -a | --add Adds users if they don't exist on the database.\n" " If they exist, they are modified unless\n" " -s|--skipexisting is also used.\n" " \n" " -d | --delete Deletes users from the quota storage.\n" "\n" " -e | --email addr Sets the email address for the users.\n" " If the addr parameter begins with @, then\n" " the username is prepended to addr to form\n" " a valid email address.\n" "\n" " -D | --description d Adds a textual description to users or groups.\n" " \n" " -g | --groups Edit users groups instead of users.\n" " \n" " -o | --overcharge f Sets the overcharging factor applied to the user \n" " when computing the cost of a print job. Positive or \n" " negative floating point values are allowed,\n" " this allows you to do some really creative\n" " things like giving money to an user whenever\n" " he prints. The number of pages in a print job\n" " is not modified by this coefficient, only the\n" " cost of the job for a particular user.\n" " Only users have such a coefficient.\n" " \n" " -i | --ingroups g1[,g2...] Puts the users into each of the groups\n" " listed, separated by commas. The groups\n" " must already exist in the Quota Storage.\n" " \n" " -L | --list Lists users or groups.\n" " \n" " -l | --limitby l Choose if the user/group is limited in printing \n" " by its account balance or by its page quota.\n" " The default value is 'quota'. Allowed values\n" " are 'quota' 'balance' 'noquota' 'noprint' \n" " and 'nochange' :\n" " \n" " - quota : limit by number of pages per printer.\n" " - balance : limit by number of credits in account.\n" " - noquota : no limit, accounting still done.\n" " - nochange : no limit, accounting not done. \n" " - noprint : printing is denied. \n" " NB : nochange and noprint are not supported for groups.\n" " \n" " -b | --balance b Sets the user's account balance to b. \n" " Account balance may be increase or decreased\n" " if b is prefixed with + or -.\n" " WARNING : when decreasing account balance,\n" " the total paid so far by the user is decreased\n" " too.\n" " Groups don't have a real balance, but the\n" " sum of their users' account balance.\n" " \n" " -C | --comment txt Defines some informational text to be associated\n" " with a change to an user's account balance.\n" " Only meaningful if -b | --balance is also used.\n" " \n" " \n" " -r | --remove In combination with the --ingroups option above, \n" " remove users from the specified users groups.\n" " \n" " -s | --skipexisting In combination with the --add option above, tells\n" " pkusers to not modify existing users.\n" " \n" " user1 through userN and group1 through groupN can use wildcards\n" " if the --add option is not set.\n" " \n" "examples : \n" "\n" " $ pkusers --add john paul george ringo/ringo@example.com\n" " \n" " This will add users john, paul, george and ringo to the quota\n" " database. User ringo's email address will also be set to \n" " 'ringo@example.com'\n" " \n" " $ pkusers --ingroups coders,it jerome\n" " \n" " User jerome is put into the groups \"coders\" and \"it\" which must\n" " already exist in the quota database.\n" " \n" " $ pkusers --limitby balance jerome\n" " \n" " This will tell PyKota to limit jerome by his account's balance\n" " when printing.\n" " \n" " $ pkusers --balance +10.0 --comment \"He paid with his blood !\" jerome\n" " \n" " This will increase jerome's account balance by 10.0 (in your\n" " own currency). You can decrease the account balance with a\n" " dash prefix, and set it to a fixed amount with no prefix.\n" " A comment will be stored for this balance change.\n" " \n" " $ pkusers --delete jerome rachel\n" " \n" " This will completely delete jerome and rachel from the quota\n" " database. All their quotas and jobs will be deleted too.\n" " \n" " $ pkusers --overcharge 2.5 poorstudent\n" " \n" " This will overcharge the poorstudent user by a factor of 2.5.\n" " \n" " $ pkusers --overcharge -1 jerome\n" " \n" " User jerome will actually earn money whenever he prints.\n" " \n" " $ pkusers --overcharge 0 boss\n" " \n" " User boss can print at will, it won't cost him anything because the\n" " cost of each print job will be multiplied by zero before charging\n" " his account.\n" "\n" " $ pkusers --email @example.com\n" "\n" " This will set the email address for each user to username@example.com\n" msgstr "" #, python-format msgid "Invalid email address %s" msgstr "Dirección de correo electrónico %s inválida" #, python-format msgid "There's no %s matching %s" msgstr "" #, python-format msgid "Limited by : %s" msgstr "" #, python-format msgid "Account balance : %.2f" msgstr "" #, python-format msgid "Total paid so far : %.2f" msgstr "" #, python-format msgid "Overcharging factor : %.2f" msgstr "" #, python-format msgid "Group balance : %.2f" msgstr "" #, python-format msgid "Invalid limitby value %s" msgstr "Valor %s inválido para la opción «limitby»" #, python-format msgid "Invalid overcharge value %s" msgstr "Valor de recarga, %s, inválido" #, python-format msgid "Invalid balance value %s" msgstr "Valor de saldo %s inválido" #, python-format msgid "There's no users group matching %s" msgstr "" #, python-format msgid "Unknown group %s" msgstr "Grupo %s desconocido" #, python-format msgid "Unknown user %s" msgstr "Usuario %s desconocido" #, python-format msgid "%s %s already exists, skipping." msgstr "" #, python-format msgid "%s %s already exists, will be modified." msgstr "" #, python-format msgid "Invalid name %s" msgstr "" msgid "You have to pass user groups names on the command line" msgstr "" #, python-format msgid "" "pykosd v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "An OSD quota monitor for PyKota.\n" "\n" "command line usage :\n" "\n" " pykosd [options]\n" "\n" "options :\n" "\n" " -v | --version Prints pykosd's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -c | --color #rrggbb Sets the color to use for display as an hexadecimal\n" " triplet, for example #FF0000 is 100%% red.\n" " Defaults to 100%% green (#00FF00).\n" " \n" " -d | --duration d Sets the duration of the display in seconds. \n" " Defaults to 3 seconds.\n" " \n" " -f | --font f Sets the font to use for display. \n" " Defaults to the Python OSD library's default.\n" " \n" " -l | --loop n Sets the number of times the info will be displayed.\n" " Defaults to 0, which means loop forever.\n" " \n" " -s | --sleep s Sets the sleeping duration between two displays \n" " in seconds. Defaults to 180 seconds (3 minutes).\n" " \n" " \n" "examples : \n" "\n" " $ pykosd -s 60 --loop 5\n" " \n" " Will launch pykosd. Display will be refreshed every 60 seconds,\n" " and will last for 3 seconds (the default) each time. After five\n" " iterations, the program will exit.\n" msgstr "" #, python-format msgid "Invalid duration option %s" msgstr "Opción de duración %s inválida" #, python-format msgid "Invalid loop option %s" msgstr "Opción de bucle %s inválida" #, python-format msgid "Invalid sleep option %s" msgstr "Opción «sleep» %s inválida" #, python-format msgid "Invalid color option %s" msgstr "Opción de color %s inválida" #, python-format msgid "User %s doesn't exist in PyKota's database" msgstr "El usuario %s no existe en la base de datos de PyKota" #, python-format msgid "Pages used on %s : %s" msgstr "Páginas utilizadas en %s : %s" #, python-format msgid "PyKota Units left : %.2f" msgstr "Unidades restantes de PyKota : %.2f" msgid "Printing denied." msgstr "" msgid "Printing not limited." msgstr "" msgid "Printing not limited, no accounting." msgstr "" #, python-format msgid "" "pykotme v%(__version__)s (c) %(__years__)s %(__author__)s\n" "\n" "Gives print quotes to users.\n" "\n" "command line usage :\n" "\n" " pykotme [options] [files]\n" "\n" "options :\n" "\n" " -v | --version Prints pykotme's version number then exits.\n" " -h | --help Prints this message then exits.\n" " \n" " -P | --printer p Gives a quote for this printer only. Actually p can\n" " use wildcards characters to select only\n" " some printers. The default value is *, meaning\n" " all printers.\n" " You can specify several names or wildcards, \n" " by separating them with commas.\n" " \n" "examples : \n" "\n" " $ pykotme --printer apple file1.ps file2.ps\n" " \n" " This will give a print quote to the current user. The quote will show\n" " the price and size of a job consisting in file1.ps and file2.ps \n" " which would be sent to the apple printer.\n" " \n" " $ pykotme --printer apple,hplaser \n" msgstr "" "\n" "\n" "Entre en contacto con su administrador de sistema, por favor :\n" "\n" "\t%s - <%s>\n" #, python-format msgid "Unable to match user %s on printer %s, applying default policy (%s)" msgstr "Imposible encontrar al usuario %s en la impresora %s, se aplica la política por defecto (%s)" #, python-format msgid "Unable to find user %s's account balance, applying default policy (%s) for printer %s" msgstr "No se ha encontrado el saldo del usuario %s, aplicando la política por defecto (%s) para la impresora %s" #, python-format msgid "User %s will not be charged for printing." msgstr "No se cambiará al usuario %s para imprimir." #, python-format msgid "Print Quota exceeded for group %s on printer %s" msgstr "Cuota de impresión excedida para el grupo %s en la impresora %s" msgid "Print Quota Exceeded" msgstr "Cuota de Impresión Excedida" #, python-format msgid "Print Quota low for group %s on printer %s" msgstr "Cuota de impresión baja para el grupo %s en la impresora %s" msgid "Print Quota Low" msgstr "Cuota de Impresión Baja" #, python-format msgid "Search base %s doesn't seem to exist. Probable misconfiguration. Please double check /etc/pykota/pykota.conf : %s" msgstr "La base de búsqueda %s parece no existir. Probablemente se deba a una mala configuración. Por favor, verifique el archivo /etc/pykota/pykota.conf : %s" #, python-format msgid "Search for %s(%s) from %s(scope=%s) returned no answer." msgstr "La búsqueda por %s(%s) desde %s(scope=%s) no ha devuelto ninguna respuesta." #, python-format msgid "Problem adding LDAP entry (%s, %s)" msgstr "Problema al añadir la entrada LDAP (%s, %s)" #, python-format msgid "Problem deleting LDAP entry (%s)" msgstr "Problema al borrar la entrada LDAP (%s)" #, python-format msgid "Problem modifying LDAP entry (%s, %s)" msgstr "Problema al modificar la entrada LDAP (%s, %s)" #, python-format msgid "No pykotaAccountBalance object found for user %s. Did you create LDAP entries manually ?" msgstr "No se ha encontrado el objeto pykotaAccountBalance para el usuario %s. ¿Ha creado las entradas LDAP manualmente?" msgid "Hidden because of privacy concerns" msgstr "" #, python-format msgid "Unable to find an existing objectClass %s entry with %s=%s to attach pykotaAccount objectClass" msgstr "No se ha podido encontrar una entrada objectClass %s existente con %s=%s para anexionar el objectClass pykotaAccount" #, python-format msgid "%s. A new entry will be created instead." msgstr "" #, python-format msgid "Unable to find an existing entry to attach pykotaGroup objectclass %s" msgstr "No se ha podido encontrar una entrada existente para anexionar el objectClass pykotaGroup %s" msgid "Your version of python-mysqldb is too old. Please install a newer release." msgstr "" #, python-format msgid "A problem occured while reading printer %s's internal page counter." msgstr "Ha ocurrido un problema mientras se estaba leyendo el contador de páginas interno de la impresora %s." #, python-format msgid "Retrieving printer %s's page counter from database instead." msgstr "Recuperando el contador de páginas de la impresora %s desde la base de datos en su lugar." #, python-format msgid "Couldn't retrieve printer %s's internal page counter either before or after printing." msgstr "No se ha podido recuperar el contador de páginas interno de la impresora %s bien antes bien después de imprimir." #, python-format msgid "Job's size forced to 1 page for printer %s." msgstr "Tamaño del trabajo forzado a 1 página para la impresora %s." #, python-format msgid "No previous job in database for printer %s." msgstr "No hay trabajos previos en la base de datos para la impresora %s." #, python-format msgid "Inconsistent values for printer %s's internal page counter." msgstr "Valor inconsistente para el contador de páginas interno de la impresora %s." #, python-format msgid "Unknown printer address in HARDWARE(%s) for printer %s" msgstr "Dirección desconocida en HARDWARE(%s) para la impresora %s" #, python-format msgid "Launching HARDWARE(%s)..." msgstr "Arrancando HARDWARE(%s)..." #, python-format msgid "SIGTERM was sent to hardware accounter %s (pid: %s)" msgstr "Se ha enviado la señal SIGTERM al contador de páginas hardware %s (pid: %s)" #, python-format msgid "Line [%s] skipped in accounter's output. Trying again..." msgstr "Línea [%s] saltada en la salida del contador. Intentándolo de nuevo..." #, python-format msgid "Hardware accounter %s exit code is %s" msgstr "Contador por hardware %s cuyo código de salida es %s" #, python-format msgid "Unable to query printer %s via HARDWARE(%s)" msgstr "Imposible consultar la impresora %s vía HARDWARE(%s)" #, python-format msgid "Unable to precompute the job's size and ink coverage with the generic PDL analyzer : %s" msgstr "" #, python-format msgid "Problem during connection to %s:%s : %s" msgstr "Problema durante la conexión a %s:%s : %s" #, python-format msgid "Problem while sending PJL query to %s:%s : %s" msgstr "Problema mientras se enviaba la petición PJL a %s:%s : %s" #, python-format msgid "Problem while receiving PJL answer from %s:%s : %s" msgstr "" #, python-format msgid "Waiting for printer %s to be printing..." msgstr "Esperando a que la impresora %s imprima..." #, python-format msgid "Waiting for printer %s's idle status to stabilize..." msgstr "Esperando al estado inactivo de la impresora %s para estabilizar..." #, python-format msgid "PJL querying stage interrupted. Using latest value seen for internal page counter (%s) on printer %s." msgstr "Etapa de petición PJL interrumpida. Utilizando el último valor visto en el contador interno de páginas (%s) en la impresora %s." #, python-format msgid "SNMP querying stage interrupted. Using latest value seen for internal page counter (%s) on printer %s." msgstr "Etapa de petición SNMP interrumpida. Utilizando el último valor visto en el contador interno de páginas (%s) en la impresora %s." #, python-format msgid "Network error while doing SNMP queries on printer %s : %s" msgstr "Errores de red mientras se hacían peticiones en la impresora %s : %s" #, python-format msgid "SNMP message decoding error for printer %s : %s" msgstr "Error de descodificación del mensaje SNMP para la impresora %s : %s" #, python-format msgid "Problem encountered while doing SNMP queries on printer %s : %s" msgstr "Se han encontrado problemas mientras se hacían peticiones SNMP en la impresora %s : %s" #, python-format msgid "Unable to precompute the job's size with the generic PDL analyzer : %s" msgstr "No se ha podido calcular el tamaño del trabajo con el analizador PDL genérico : %s" #, python-format msgid "Launching SOFTWARE(%s)..." msgstr "Arrancando SOFTWARE(%s)..." #, python-format msgid "Unable to compute job size with accounter %s" msgstr "Imposible calcular el tamaño del trabajo con el contador %s" #, python-format msgid "Problem while waiting for software accounter pid %s to exit : %s" msgstr "Ha ocurrido un problema mientras se estaba esperado a que terminase el contador software con pid %s: %s" #, python-format msgid "Software accounter %s exit code is %s" msgstr "Código de salida %s para el contador por software %s" msgid "Totals may be inaccurate if some users are members of several groups." msgstr "Los totales pueden ser erróneos si algunos usuarios son miembros de varios grupos." msgid "PyKota Data Dumper" msgstr "Volcado de datos de PyKota" msgid "Dump" msgstr "Volcado" msgid "Please click on the above button" msgstr "Pulse sobre el botón de arriba, por favor" msgid "Data Type" msgstr "Tipo de datos" msgid "Output Format" msgstr "Formato de salida" msgid "Filter" msgstr "Filtro" msgid "Summarize" msgstr "" msgid "only for payments or history" msgstr "" msgid "PyKota Reports" msgstr "Informes de PyKota" msgid "Report" msgstr "Informe" msgid "Printer" msgstr "Impresora" msgid "User / Group names mask" msgstr "Máscara para el nombre de Usuario / Grupo" msgid "Groups report" msgstr "Informes de los grupos" msgid "Empty" msgstr "Vacío" msgid "Action" msgstr "Acción" msgid "User" msgstr "Usuario" msgid "Hostname" msgstr "Hostname" msgid "JobId" msgstr "IdTrabajo" msgid "Number of pages" msgstr "" msgid "Cost" msgstr "" msgid "Copies" msgstr "Copias" msgid "Number of bytes" msgstr "" msgid "Printer's internal counter" msgstr "" msgid "Options" msgstr "Opciones" msgid "MD5Sum" msgstr "SumaMD5" msgid "Billing code" msgstr "" msgid "Precomputed number of pages" msgstr "" msgid "Precomputed cost" msgstr "" msgid "Pages details" msgstr "" msgid "(not supported yet)" msgstr "" msgid "Previous page" msgstr "Página anterior" msgid "PyKota Quotes" msgstr "" msgid "Quote" msgstr "" msgid "The exact cost of a print job can only be determined for a particular user. Please retry while logged-in." msgstr "" msgid "Ordering" msgstr "" #~ msgid "Impossible to add printer %s" #~ msgstr "Imposible añadir la impresora %s" #~ msgid "Prototype object %s not found in Quota Storage." #~ msgstr "El objeto Prototipo %s no se ha encontrado en el Almacén de Cuotas." #~ msgid "Prototype %s not found in Quota Storage for printer %s." #~ msgstr "El prototipo %s no se ha encontrado en el Almacén de Cuotas para la impresora %s." #~ msgid "Undefined hard limit set to soft limit (%s) on printer %s." #~ msgstr "Límite duro indefinido, ajustado al límite blando (%s) en la impresora %s." #~ msgid "Undefined soft limit set to hard limit (%s) on printer %s." #~ msgstr "Límite blando indefinido, ajustado al límite duro (%s) en la impresora %s." #~ msgid "Invalid group name %s" #~ msgstr "Nombre de grupo %s inválido" #~ msgid "Invalid user name %s" #~ msgstr "Nombre de usuario %s inválido" #~ msgid "Quota not found for object %s on printer %s." #~ msgstr "Cuota no encontrada para el objeto %s en la impresora %s." #~ msgid "Group %s not found in the PyKota Storage." #~ msgstr "Grupo %s no encontrado en el Almacén de PyKota." #~ msgid "Job is a duplicate. Printing is denied." #~ msgstr "El trabajo es un duplicado. La impresión se ha denegado." #~ msgid "File number %s unregistered twice from polling object, ignored." #~ msgstr "No se ha registrado dos veces el archivo número %s desde el objeto 'polling', ignorado." #~ msgid "SIGTERM was sent to real backend %s (pid: %s)" #~ msgstr "Se ha enviado la señal SIGTERM al backend real %s (pid: %s)" #~ msgid "CUPS backend %s died abnormally." #~ msgstr "El backend de CUPS %s murió anormalmente." #~ msgid "Software accounting already done in first pass. Ignoring." #~ msgstr "Ya se ha realizado la contabilidad por software en el primer paso. Ignorándolo." #~ msgid "Hardware accounting already done in first pass. Ignoring." #~ msgstr "Ya se ha realizado la contabilidad por hardware en el primer paso. Ignorándolo." #~ msgid "Job size and price now set in history." #~ msgstr "El tamaño y precio del trabajo se ha establecido ahora en el historial." #~ msgid "Invalid DeviceURI : %s" #~ msgstr "DeviceURI inválida : %s" #~ msgid "" #~ "\n" #~ "Please wait while pkhint analyzes your printing system's configuration..." #~ msgstr "" #~ "\n" #~ "Por favor, espere mientras 'pkhint' analiza sus archivos de configuración del sistema de impresión..." #~ msgid "Unknown device %s for printer %s" #~ msgstr "Dispositivo %s desconocido para la impresora %s" #~ msgid "" #~ "\n" #~ "Put the following lines into your /etc/pykota/pykota.conf file :\n" #~ msgstr "" #~ "\n" #~ "Coloque las siguientes líneas en su archivo /etc/pykota/pykota.conf : \n" #~ msgid "# BEWARE : if software accounting is suggested, this doesn't mean" #~ msgstr "# CUIDADO : si se ha sugerido la contabilidad por software, esto no significa" #~ msgid "# that hardware accounting wouldn't work, this only means that PyKota" #~ msgstr "# que la contabilidad por hardware vaya a funcionar, esto sólo significa que PyKota" #~ msgid "# wasn't able to autodetect which hardware accounting method to use." #~ msgstr "# no podrá autodetectar el método de contabilidad por hardware a utilizar." #~ msgid "JobSize" #~ msgstr "TamañoTrabajo" #~ msgid "JobPrice" #~ msgstr "PrecioTrabajo" #~ msgid "JobBytes" #~ msgstr "BytesTrabajo" #~ msgid "PageCounter" #~ msgstr "ContadorPáginas" #~ msgid "BillingCode" #~ msgstr "CódigoDeFacturación" #~ msgid "Pages" #~ msgstr "Páginas" #~ msgid "Printing system %s, args=%s" #~ msgstr "Sistema de impresión %s, args=%s" #~ msgid "Printer hostname undefined, set to 'localhost'" #~ msgstr "Hostname de la impresora no definido, ajustándolo a «localhost»" #~ msgid "Printing system unknown, args=%s" #~ msgstr "Sistema de impresión desconocido, args=%s" #~ msgid "" #~ "autopykota v%s (c) %s %s\n" #~ "\n" #~ "A tool to automate user account creation and initial balance setting.\n" #~ "\n" #~ "THIS TOOL MUST NOT BE USED IF YOU WANT TO LIMIT YOUR USERS BY PAGE QUOTA !\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " THIS TOOL MUST NOT BE USED FROM THE COMMAND LINE BUT ONLY AS PART\n" #~ " OF AN external policy IN pykota.conf\n" #~ " \n" #~ " autopykota { -i | --initbalance value } \n" #~ "\n" #~ "options :\n" #~ "\n" #~ " -v | --version Prints autopykota's version number then exits.\n" #~ " -h | --help Prints this message then exits.\n" #~ " \n" #~ " -i | --initbalance b Sets the user's account initial balance value to b.\n" #~ " If the user already exists, actual balance is left\n" #~ " unmodified. If unset, the default value is 0.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "autopykota v%s (c) %s %s\n" #~ "\n" #~ "Herramienta que automatiza la creación de cuentas de usuario y el \n" #~ "establecimiento inicial del saldo.\n" #~ "\n" #~ "¡NO DEBE USAR ESTA HERRAMIENTA SI QUIERE HACER USO DEL LÍMITE POR CUOTA\n" #~ " DE PÁGINA!\n" #~ "\n" #~ "uso desde la línea de comandos:\n" #~ "\n" #~ " NO HA DE UTILIZAR ESTA HERRAMIENTA DESDE LA LÍNEA DE COMANDOS, ÚNICAMENTE\n" #~ " COMO PARTE DE UNA «política externa» EN EL ARCHIVO pykota.conf\n" #~ "\n" #~ " autopykota { -i | --initbalance valor } \n" #~ "\n" #~ "opciones:\n" #~ "\n" #~ " -v | --version Muestra el número de versión de atopykota y\n" #~ " luego sale.\n" #~ " -h | --help Muestra este mensaje y luego sale.\n" #~ " \n" #~ " -i | --initbalance b Establece el saldo inicial para la cuenta del\n" #~ " usuario al valor «b». Si el usuario ya existe,\n" #~ " se deja el saldo actual sin modificar. Si no se\n" #~ " ha establecido, el valor por defecto es 0\n" #~ "\n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Por favor, envíe los errores por correo electrónico a: %s" #~ msgid "" #~ "edpykota v%s (c) %s %s\n" #~ "\n" #~ "A Print Quota editor for PyKota.\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " edpykota [options] user1 user2 ... userN\n" #~ " \n" #~ " edpykota [options] group1 group2 ... groupN\n" #~ "\n" #~ "options :\n" #~ "\n" #~ " -v | --version Prints edpykota's version number then exits.\n" #~ " -h | --help Prints this message then exits.\n" #~ " \n" #~ " -a | --add Adds users and/or printers if they don't \n" #~ " exist on the Quota Storage Server.\n" #~ " \n" #~ " -d | --delete Deletes users/groups from the quota storage.\n" #~ " Printers are never deleted.\n" #~ " \n" #~ " -c | --charge p[,j] Sets the price per page and per job to charge\n" #~ " for a particular printer. Job price is optional.\n" #~ " If both are to be set, separate them with a comma.\n" #~ " Floating point values are allowed.\n" #~ " \n" #~ " -o | --overcharge f Sets the overcharging factor applied to the user \n" #~ " when computing the cost of a print job. Positive or \n" #~ " negative floating point values are allowed,\n" #~ " this allows you to do some really creative\n" #~ " things like giving money to an user whenever\n" #~ " he prints. The number of pages in a print job\n" #~ " is not modified by this coefficient, only the\n" #~ " cost of the job for a particular user.\n" #~ " Only users have a coefficient.\n" #~ " \n" #~ " -i | --ingroups g1[,g2...] Puts the users into each of the groups\n" #~ " listed, separated by commas. The groups\n" #~ " must already exist in the Quota Storage.\n" #~ " \n" #~ " -u | --users Edit users print quotas, this is the default.\n" #~ " \n" #~ " -P | --printer p Edit quotas on printer p only. Actually p can\n" #~ " use wildcards characters to select only\n" #~ " some printers. The default value is *, meaning\n" #~ " all printers. \n" #~ " You can specify several names or wildcards, \n" #~ " by separating them with commas.\n" #~ " \n" #~ " -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n" #~ " pg1, pg2, etc... which must already exist.\n" #~ " A printer group is just like a normal printer,\n" #~ " only that it is usually unknown from the printing\n" #~ " system. Create printer groups exactly the same\n" #~ " way that you create printers, then add other \n" #~ " printers to them with this option.\n" #~ " Accounting is done on a printer and on all\n" #~ " the printer groups it belongs to, quota checking\n" #~ " is done on a printer and on all the printer groups\n" #~ " it belongs to.\n" #~ " \n" #~ " -g | --groups Edit users groups print quotas instead of users.\n" #~ " \n" #~ " -p | --prototype u|g Uses user u or group g as a prototype to set\n" #~ " print quotas\n" #~ " \n" #~ " -n | --noquota Doesn't set a quota but only does accounting.\n" #~ " \n" #~ " -r | --reset Resets the actual page counter for the user\n" #~ " or group to zero on the specified printers. \n" #~ " The life time page counter is kept unchanged.\n" #~ " \n" #~ " -R | --hardreset Resets the actual and life time page counters\n" #~ " for the user or group to zero on the specified \n" #~ " printers. This is a shortcut for '--used 0'.\n" #~ " \n" #~ " -l | --limitby l Choose if the user/group is limited in printing \n" #~ " by its account balance or by its page quota.\n" #~ " The default value is 'quota'. Allowed values\n" #~ " are 'quota' 'balance' 'quota-then-balance' and\n" #~ " 'balance-then-quota'.\n" #~ " WARNING : quota-then-balance and balance-then-quota\n" #~ " are not yet implemented.\n" #~ " \n" #~ " -b | --balance b Sets the user's account balance to b. \n" #~ " Account balance may be increase or decreased\n" #~ " if b is prefixed with + or -.\n" #~ " WARNING : when decreasing account balance,\n" #~ " the total paid so far by the user is decreased\n" #~ " too.\n" #~ " Groups don't have a real balance, but the\n" #~ " sum of their users' account balance.\n" #~ " \n" #~ " -S | --softlimit sl Sets the quota soft limit to sl pages. \n" #~ " \n" #~ " -H | --hardlimit hl Sets the quota hard limit to hl pages.\n" #~ "\n" #~ " -U | --used usage Sets the pagecounters for the user to usage pages;\n" #~ " useful for migrating users from a different system\n" #~ " where they have already used some pages. Actual\n" #~ " and Life Time page counters may be increased or decreased\n" #~ " if usage is prefixed with + or -.\n" #~ " WARNING : BOTH page counters are modified in all cases,\n" #~ " so be careful.\n" #~ " NB : if 'usage' equals '0', then the action taken is\n" #~ " the same as if --hardreset was used.\n" #~ "\n" #~ " user1 through userN and group1 through groupN can use wildcards\n" #~ " if the --add option is not set.\n" #~ " \n" #~ "examples : \n" #~ "\n" #~ " $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n" #~ " \n" #~ " This will add users john, paul, george and ringo to the quota\n" #~ " database, and set their print quotas to the same values than user \n" #~ " jerome. User jerome must already exist.\n" #~ " User ringo's email address will also be set to 'ringo@example.com'\n" #~ " \n" #~ " $ edpykota --printer lp -S 50 -H 60 jerome\n" #~ " \n" #~ " This will set jerome's print quota on the lp printer to a soft limit\n" #~ " of 50 pages, and a hard limit of 60 pages. If either user jerome or\n" #~ " printer lp doesn't exist on the Quota Storage Server then nothing is done.\n" #~ "\n" #~ " $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n" #~ " \n" #~ " Same as above, but if either user jerome or printer lp doesn't exist \n" #~ " on the Quota Storage Server they are automatically added. Also\n" #~ " user jerome is put into the groups \"coders\" and \"it\" which must\n" #~ " already exist in the Quota Storage.\n" #~ " \n" #~ " $ edpykota -g -S 500 -H 550 financial support \n" #~ " \n" #~ " This will set print quota soft limit to 500 pages and hard limit\n" #~ " to 550 pages for groups financial and support on all printers.\n" #~ " \n" #~ " $ edpykota --reset jerome \"jo*\"\n" #~ " \n" #~ " This will reset jerome's page counter to zero on all printers, as\n" #~ " well as every user whose name begins with 'jo'.\n" #~ " Their life time page counter on each printer will be kept unchanged.\n" #~ " You can also reset the life time page counters by using the\n" #~ " --hardreset | -R command line option.\n" #~ " \n" #~ " $ edpykota --printer hpcolor --noquota jerome\n" #~ " \n" #~ " This will tell PyKota to not limit jerome when printing on the \n" #~ " hpcolor printer. All his jobs will be allowed on this printer, but \n" #~ " accounting of the pages he prints will still be kept.\n" #~ " Print Quotas for jerome on other printers are unchanged.\n" #~ " \n" #~ " $ edpykota --limitby balance jerome\n" #~ " \n" #~ " This will tell PyKota to limit jerome by his account's balance\n" #~ " when printing.\n" #~ " \n" #~ " $ edpykota --balance +10.0 jerome\n" #~ " \n" #~ " This will increase jerome's account balance by 10.0 (in your\n" #~ " own currency). You can decrease the account balance with a\n" #~ " dash prefix, and set it to a fixed amount with no prefix.\n" #~ " \n" #~ " $ edpykota --delete jerome rachel\n" #~ " \n" #~ " This will completely delete jerome and rachel from the Quota Storage\n" #~ " database. All their quotas and jobs will be deleted too.\n" #~ " \n" #~ " $ edpykota --printer lp --charge 0.1\n" #~ " \n" #~ " This will set the page price for printer lp to 0.1. Job price\n" #~ " will not be changed.\n" #~ " \n" #~ " $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n" #~ " \n" #~ " This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n" #~ " When printing either on hplj1 or hplj2, print quota will also be \n" #~ " checked and accounted for on virtual printers Laser and HP.\n" #~ " \n" #~ " $ edpykota --overcharge 2.5 poorstudent\n" #~ " \n" #~ " This will overcharge the poorstudent user by a factor of 2.5.\n" #~ " \n" #~ " $ edpykota --overcharge -1 jerome\n" #~ " \n" #~ " User jerome will actually earn money whenever he prints.\n" #~ " \n" #~ " $ edpykota --overcharge 0 boss\n" #~ " \n" #~ " User boss can print at will, it won't cost him anything because the\n" #~ " cost of each print job will be multiplied by zero before charging\n" #~ " his account.\n" #~ "\n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "edpykota v%s (c) %s %s\n" #~ "\n" #~ "A Print Quota editor for PyKota.\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " edpykota [options] user1 user2 ... userN\n" #~ " \n" #~ " edpykota [options] group1 group2 ... groupN\n" #~ "\n" #~ "options :\n" #~ "\n" #~ " -v | --version Prints edpykota's version number then exits.\n" #~ " -h | --help Prints this message then exits.\n" #~ " \n" #~ " -a | --add Adds users and/or printers if they don't \n" #~ " exist on the Quota Storage Server.\n" #~ " \n" #~ " -d | --delete Deletes users/groups from the quota storage.\n" #~ " Printers are never deleted.\n" #~ " \n" #~ " -c | --charge p[,j] Sets the price per page and per job to charge\n" #~ " for a particular printer. Job price is optional.\n" #~ " If both are to be set, separate them with a comma.\n" #~ " Floating point values are allowed.\n" #~ " \n" #~ " -o | --overcharge f Sets the overcharging factor applied to the user \n" #~ " when computing the cost of a print job. Positive or \n" #~ " negative floating point values are allowed,\n" #~ " this allows you to do some really creative\n" #~ " things like giving money to an user whenever\n" #~ " he prints. The number of pages in a print job\n" #~ " is not modified by this coefficient, only the\n" #~ " cost of the job for a particular user.\n" #~ " Only users have a coefficient.\n" #~ " \n" #~ " -i | --ingroups g1[,g2...] Puts the users into each of the groups\n" #~ " listed, separated by commas. The groups\n" #~ " must already exist in the Quota Storage.\n" #~ " \n" #~ " -u | --users Edit users print quotas, this is the default.\n" #~ " \n" #~ " -P | --printer p Edit quotas on printer p only. Actually p can\n" #~ " use wildcards characters to select only\n" #~ " some printers. The default value is *, meaning\n" #~ " all printers. \n" #~ " You can specify several names or wildcards, \n" #~ " by separating them with commas.\n" #~ " \n" #~ " -G | --pgroups pg1[,pg2...] Adds the printer(s) to the printer groups\n" #~ " pg1, pg2, etc... which must already exist.\n" #~ " A printer group is just like a normal printer,\n" #~ " only that it is usually unknown from the printing\n" #~ " system. Create printer groups exactly the same\n" #~ " way that you create printers, then add other \n" #~ " printers to them with this option.\n" #~ " Accounting is done on a printer and on all\n" #~ " the printer groups it belongs to, quota checking\n" #~ " is done on a printer and on all the printer groups\n" #~ " it belongs to.\n" #~ " \n" #~ " -g | --groups Edit users groups print quotas instead of users.\n" #~ " \n" #~ " -p | --prototype u|g Uses user u or group g as a prototype to set\n" #~ " print quotas\n" #~ " \n" #~ " -n | --noquota Doesn't set a quota but only does accounting.\n" #~ " \n" #~ " -r | --reset Resets the actual page counter for the user\n" #~ " or group to zero on the specified printers. \n" #~ " The life time page counter is kept unchanged.\n" #~ " \n" #~ " -R | --hardreset Resets the actual and life time page counters\n" #~ " for the user or group to zero on the specified \n" #~ " printers. This is a shortcut for '--used 0'.\n" #~ " \n" #~ " -l | --limitby l Choose if the user/group is limited in printing \n" #~ " by its account balance or by its page quota.\n" #~ " The default value is 'quota'. Allowed values\n" #~ " are 'quota' 'balance' 'quota-then-balance' and\n" #~ " 'balance-then-quota'.\n" #~ " WARNING : quota-then-balance and balance-then-quota\n" #~ " are not yet implemented.\n" #~ " \n" #~ " -b | --balance b Sets the user's account balance to b. \n" #~ " Account balance may be increase or decreased\n" #~ " if b is prefixed with + or -.\n" #~ " WARNING : when decreasing account balance,\n" #~ " the total paid so far by the user is decreased\n" #~ " too.\n" #~ " Groups don't have a real balance, but the\n" #~ " sum of their users' account balance.\n" #~ " \n" #~ " -S | --softlimit sl Sets the quota soft limit to sl pages. \n" #~ " \n" #~ " -H | --hardlimit hl Sets the quota hard limit to hl pages.\n" #~ "\n" #~ " -U | --used usage Sets the pagecounters for the user to usage pages;\n" #~ " useful for migrating users from a different system\n" #~ " where they have already used some pages. Actual\n" #~ " and Life Time page counters may be increased or decreased\n" #~ " if usage is prefixed with + or -.\n" #~ " WARNING : BOTH page counters are modified in all cases,\n" #~ " so be careful.\n" #~ " NB : if 'usage' equals '0', then the action taken is\n" #~ " the same as if --hardreset was used.\n" #~ "\n" #~ " user1 through userN and group1 through groupN can use wildcards\n" #~ " if the --add option is not set.\n" #~ " \n" #~ "examples : \n" #~ "\n" #~ " $ edpykota --add -p jerome john paul george ringo/ringo@example.com\n" #~ " \n" #~ " This will add users john, paul, george and ringo to the quota\n" #~ " database, and set their print quotas to the same values than user \n" #~ " jerome. User jerome must already exist.\n" #~ " User ringo's email address will also be set to 'ringo@example.com'\n" #~ " \n" #~ " $ edpykota --printer lp -S 50 -H 60 jerome\n" #~ " \n" #~ " This will set jerome's print quota on the lp printer to a soft limit\n" #~ " of 50 pages, and a hard limit of 60 pages. If either user jerome or\n" #~ " printer lp doesn't exist on the Quota Storage Server then nothing is done.\n" #~ "\n" #~ " $ edpykota --add --printer lp --ingroups coders,it -S 50 -H 60 jerome\n" #~ " \n" #~ " Same as above, but if either user jerome or printer lp doesn't exist \n" #~ " on the Quota Storage Server they are automatically added. Also\n" #~ " user jerome is put into the groups \"coders\" and \"it\" which must\n" #~ " already exist in the Quota Storage.\n" #~ " \n" #~ " $ edpykota -g -S 500 -H 550 financial support \n" #~ " \n" #~ " This will set print quota soft limit to 500 pages and hard limit\n" #~ " to 550 pages for groups financial and support on all printers.\n" #~ " \n" #~ " $ edpykota --reset jerome \"jo*\"\n" #~ " \n" #~ " This will reset jerome's page counter to zero on all printers, as\n" #~ " well as every user whose name begins with 'jo'.\n" #~ " Their life time page counter on each printer will be kept unchanged.\n" #~ " You can also reset the life time page counters by using the\n" #~ " --hardreset | -R command line option.\n" #~ " \n" #~ " $ edpykota --printer hpcolor --noquota jerome\n" #~ " \n" #~ " This will tell PyKota to not limit jerome when printing on the \n" #~ " hpcolor printer. All his jobs will be allowed on this printer, but \n" #~ " accounting of the pages he prints will still be kept.\n" #~ " Print Quotas for jerome on other printers are unchanged.\n" #~ " \n" #~ " $ edpykota --limitby balance jerome\n" #~ " \n" #~ " This will tell PyKota to limit jerome by his account's balance\n" #~ " when printing.\n" #~ " \n" #~ " $ edpykota --balance +10.0 jerome\n" #~ " \n" #~ " This will increase jerome's account balance by 10.0 (in your\n" #~ " own currency). You can decrease the account balance with a\n" #~ " dash prefix, and set it to a fixed amount with no prefix.\n" #~ " \n" #~ " $ edpykota --delete jerome rachel\n" #~ " \n" #~ " This will completely delete jerome and rachel from the Quota Storage\n" #~ " database. All their quotas and jobs will be deleted too.\n" #~ " \n" #~ " $ edpykota --printer lp --charge 0.1\n" #~ " \n" #~ " This will set the page price for printer lp to 0.1. Job price\n" #~ " will not be changed.\n" #~ " \n" #~ " $ edpykota --printer hplj1,hplj2 --pgroups Laser,HP\n" #~ " \n" #~ " This will put printers hplj1 and hplj2 in printers groups Laser and HP.\n" #~ " When printing either on hplj1 or hplj2, print quota will also be \n" #~ " checked and accounted for on virtual printers Laser and HP.\n" #~ " \n" #~ " $ edpykota --overcharge 2.5 poorstudent\n" #~ " \n" #~ " This will overcharge the poorstudent user by a factor of 2.5.\n" #~ " \n" #~ " $ edpykota --overcharge -1 jerome\n" #~ " \n" #~ " User jerome will actually earn money whenever he prints.\n" #~ " \n" #~ " $ edpykota --overcharge 0 boss\n" #~ " \n" #~ " User boss can print at will, it won't cost him anything because the\n" #~ " cost of each print job will be multiplied by zero before charging\n" #~ " his account.\n" #~ "\n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Por favor, envíe los errores por correo electrónico a: %s" #~ msgid "" #~ "pkhint v%s (c) %s %s\n" #~ "\n" #~ "A tool to give hints on what accounting method is best for each printer.\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " pkhint [options] [printer1 printer2 printer3 ... printerN] myfile.csv\n" #~ " \n" #~ " This dumps the history in a comma separated values file, for possible\n" #~ " use in a spreadsheet.\n" #~ " \n" #~ " $ dumpykota --data users --format xml -o users.xml\n" #~ " \n" #~ " Dumps all users datas to the users.xml file.\n" #~ " \n" #~ " $ dumpykota --data history printername=HP2100 username=jerome\n" #~ " \n" #~ " Dumps the job history for user jerome on printer HP2100 only.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "dumpykota v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" #~ "\n" #~ "Vuelca el contenido de la base de datos de PyKota.\n" #~ "\n" #~ "Uso desde la línea de comandos:\n" #~ "\n" #~ " dumpykota [opciones] [expresióndefiltrado]\n" #~ "\n" #~ "opciones:\n" #~ "\n" #~ " -v | --version Muestra el número de versión de dumpykota y\n" #~ " luego sale.\n" #~ " -h | --help Muestra este mensaje y luego sale.\n" #~ " \n" #~ " -d | --data type Vuelca los datos 'type'. Los tipos permitidos son:\n" #~ " \n" #~ " - history : vuelca el historial de trabajos.\n" #~ " - users : vuelca los usuarios.\n" #~ " - groups : vuelca los grupos de usuarios.\n" #~ " - printers : vuelca las impresoras.\n" #~ " - upquotas : vuelca las cuotas de usuario.\n" #~ " - gpquotas : vuelca las cuotas de los grupos\n" #~ " de usuarios.\n" #~ " - payments : vuelca los pagos de los usuarios.\n" #~ " - pmembers : vuelca los miembros de los grupos\n" #~ " de impresión.\n" #~ " - umembers : vuelca los miembros de los grupos\n" #~ " de usuarios.\n" #~ " \n" #~ " NB : la opción -d | --data de la línea de comandos\n" #~ " es OBLIGATORIA.\n" #~ " \n" #~ " -f | --format fmt Vuelca los datos en el formato 'fmt'. Cuando no se\n" #~ " especifique, el formato utilizado para el vuelco\n" #~ " de los datos será csv (valores separados por comas).\n" #~ " Todos los datos volcados están entre dobles comillas.\n" #~ " Los formatos permitidos son:\n" #~ " \n" #~ " - csv : separa los datos con comas\n" #~ " - ssv : separa los datos con puntos y coma\n" #~ " - tsv : separa los datos con tabulaciones\n" #~ " - xml : vuelca los datos como XML\n" #~ " - cups : vuelca los datos en el formato page_log de CUPS:\n" #~ " DISPONIBLE ÚNICAMENTE CON --data history\n" #~ " \n" #~ " -o | --output fname Se volcarán todos los datos a un fichero, en lugar de a la\n" #~ " salida estándar. El nombre de fichero especial '-' es el\n" #~ " valor por defecto y significa stdout.\n" #~ " AVISO: ¡los ficheros existentes se truncarán!\n" #~ " \n" #~ " Utilice las expresiones de filtrado para extraer partes aisladas\n" #~ " de los datos. Los filtros permitidos son de la forma:\n" #~ " \n" #~ " llave=valor\n" #~ " \n" #~ " Las llaves permitidas, por ahora, son:\n" #~ " \n" #~ " username Nombre del usuario\n" #~ " groupname Nombre del grupo de usuarios\n" #~ " printername Nombre de la impresora\n" #~ " pgroupname Nombre del grupo de impresoras\n" #~ " \n" #~ " Al contrario que otras herramientas de administración de PyKota, los caracteres\n" #~ " comodín no se expandirán, por lo que no puede utilizarlos.\n" #~ " \n" #~ " NB : no se permiten todas las llaves para todos los tipos de datos,\n" #~ " por lo tanto, el resultado puede estar vacío si utiliza una llave\n" #~ " que no esté disponible para un tipo particular de datos.\n" #~ " \n" #~ "Ejemplos:\n" #~ "\n" #~ " $ dumpykota --data history --format csv > mifichero.csv\n" #~ " \n" #~ " Esto vuelca el historial en un fichero con los valores separados\n" #~ " por comas, para un posible uso en una hoja de cálculo.\n" #~ " \n" #~ " $ dumpykota --data users --format xml -o usuarios.xml\n" #~ " \n" #~ " Vuelca todos los datos de los usuarios al archivo usuarios.xml.\n" #~ " \n" #~ " $ dumpykota --data history printername=HP2100 username=jerome\n" #~ " \n" #~ " Vuelca únicamente el historial de trabajos para el usuario\n" #~ " jerome en la impresora HP2100 únicamente.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Por favor, envíe los errores por correo electrónico a: %s" #~ msgid "" #~ "pkbanner v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" #~ "\n" #~ "Generates banners.\n" #~ "\n" #~ "command line usage :\n" #~ "\n" #~ " pkbanner [options] \n" #~ "\n" #~ "options :\n" #~ "\n" #~ " -v | --version Prints pkbanner's version number then exits.\n" #~ " -h | --help Prints this message then exits.\n" #~ " \n" #~ " -l | --logo img Use the image as the banner's logo. The logo will\n" #~ " be drawn at the center top of the page. The default\n" #~ " logo is /usr/share/pykota/logos/pykota.jpeg\n" #~ " \n" #~ " -p | --pagesize sz Sets sz as the page size. Most well known\n" #~ " page sizes are recognized, like 'A4' or 'Letter'\n" #~ " to name a few. The default size is A4.\n" #~ " \n" #~ " -s | --savetoner s Sets the text luminosity factor to s%%. This can be \n" #~ " used to save toner. The default value is 0, which\n" #~ " means that no toner saving will be done.\n" #~ " \n" #~ " -u | --url u Uses u as an url to be written at the bottom of \n" #~ " the banner page. The default url is :\n" #~ " http://www.pykota.com/\n" #~ " \n" #~ "examples : \n" #~ "\n" #~ " Using pkbanner directly from the command line is not recommended,\n" #~ " excepted for testing purposes. You should use pkbanner in the\n" #~ " 'startingbanner' or 'endingbanner' directives in pykota.conf\n" #~ " \n" #~ " startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n" #~ " \n" #~ " With such a setting in pykota.conf, all print jobs will be \n" #~ " prefixed with an A4 banner with no logo, and text luminosity will\n" #~ " be increased by 75%%. The PostScript output will be directly sent\n" #~ " to your printer.\n" #~ " \n" #~ " You'll find more examples in the sample configuration file included \n" #~ " in PyKota.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Please e-mail bugs to: %s" #~ msgstr "" #~ "pkbanner v%s (c) 2003, 2004, 2005 C@LL - Conseil Internet & Logiciels Libres\n" #~ "\n" #~ "Genera banners.\n" #~ "\n" #~ "Uso desde la línea de comandos:\n" #~ "\n" #~ " pkbanner [opciones] \n" #~ "\n" #~ "opciones:\n" #~ "\n" #~ " -v | --version Muestra el número de versión de pkbanner y sale.\n" #~ " -h | --help Muestra este mensaje y sale.\n" #~ " \n" #~ " -l | --logo img Utiliza la imagen como el logotipo del banner. El\n" #~ " logotipo se dibujará en la parte superior central de\n" #~ " la página. El logotipo por defecto es\n" #~ " /usr/share/pykota/logos/pykota.jpeg\n" #~ " \n" #~ " -p | --pagesize sz Establece el tamaño de la página a sz. Reconoce los\n" #~ " tamaños de página más conicidos, como 'A4' o 'Letter',\n" #~ " por nombrar unos pocos. El tamaño por defecto es A4.\n" #~ " \n" #~ " -s | --savetoner s Establece el factor de luminosidad del texto a s%%.\n" #~ " Se puede utilizar para ahorar toner. El valor por\n" #~ " defecto es 0, lo que significa que no se va a\n" #~ " ahorrar toner.\n" #~ " \n" #~ " -u | --url u Se utilizará u como la url que se escribirá en la\n" #~ " parte inferior de la página del banner. La url por\n" #~ " defecto es: http://www.librelogiciel.com/software/\n" #~ " \n" #~ "ejemplos:\n" #~ "\n" #~ " No se recomienda el uso de pkbanner desde la línea de comandos\n" #~ " directamente, excepto para pruebas. Debería utilizar pkbanner\n" #~ " en las directivas 'startingbanner' o 'endingbanner' del\n" #~ " archivo de configuración pykota.conf\n" #~ " \n" #~ " startingbanner: /usr/bin/pkbanner --logo=\"\" --savetoner=75\n" #~ " \n" #~ " Si se establece esto en pykota.conf, a todos los trabajos\n" #~ " de impresión le antecederá un banner en A4 sin logotipo,\n" #~ " y la luminosidad del texto se incrementará en un 75%%.\n" #~ " La salida PostScript se enviará directamente a su impresora.\n" #~ " \n" #~ " Encontrará más ejemplos en el archivo de configuración de ejemplo\n" #~ " distribuído con PyKota.\n" #~ " \n" #~ "This program is free software; you can redistribute it and/or modify\n" #~ "it under the terms of the GNU General Public License as published by\n" #~ "the Free Software Foundation; either version 2 of the License, or\n" #~ "(at your option) any later version.\n" #~ "\n" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ "\n" #~ "You should have received a copy of the GNU General Public License\n" #~ "along with this program; if not, write to the Free Software\n" #~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.\n" #~ "\n" #~ "Por favor, envíe los errores por correo electrónico a: %s"